Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.1.1. Dimensions and new design of a body of the Camry car
1.1.2. Some design features of salon and interior of the new Camry car
1.1.3. Salon and the dashboard of the car – general information
1.1.4. Identification data of the car
1.1.5. Podkapotny space
1.1.6. Technical characteristics of engines
1.1.7. Filling capacities of units and systems, the recommended operational materials
1.1.8. Keys, locks of doors, hatch, anticreeping system
1.1.9. Cowl, trunk lid lever, hatch of a mouth of the fuel tank
1.1.10. Power windows of doors
1.1.10.1. Control of the power window of a door of the driver
1.1.10.2. Management of electric window regulators of doors of passengers
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-1-10-1-upravlenie-ehlektricheskim-steklopodemnikom-dveri-voditelya.html

1.1.10.1. Control of the power window of a door of the driver

Fig. 1.46. Switch of the power window of a door of the driver


Use the switch on a door of the driver (fig. 1.46).
At normal functioning glass moves all the time while you hold the switch.
For opening: slightly press the switch down.
For closing: slightly pull the switch up.
In the automatic mode press the switch down to an emphasis or pull it up to an emphasis, and then release. The window or completely will open, or will completely be closed. To suspend the movement of glass halfway, the switch should be moved slightly in an opposite direction, and then to release.
During automatic closing or closing at the taken-out key glass stops and opens half if between glass and a frame of a window any subject is jammed.
At strong blow to glass this function can work even if nothing is jammed.

ATTENTION
Function of protection against jamming can not work if something is jammed just before glass completely is closed.

"previous page
1.1.10. Power windows of doors
following page"
1.1.10.2. Management of electric window regulators of doors of passengers