Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.1.1. Dimensions and new design of a body of the Camry car
1.1.2. Some design features of salon and interior of the new Camry car
1.1.3. Salon and the dashboard of the car – general information
1.1.4. Identification data of the car
1.1.5. Podkapotny space
1.1.6. Technical characteristics of engines
1.1.7. Filling capacities of units and systems, the recommended operational materials
1.1.8. Keys, locks of doors, hatch, anticreeping system
1.1.8.1. System of blocking of the engine
1.1.8.2. Wireless remote device
1.1.8.3. Locking and unlocking of doors
1.1.8.4. Unlocking of a trunk lid
1.1.8.5. Unlocking of a trunk lid by means of a key
1.1.8.6. Replacement of a battery in the wireless device of remote control
1.1.8.7. Registration of an identification code
1.1.8.8. Unlocking and locking of side doors by means of a key
1.1.8.9. Unlocking and locking of side doors button of internal blocking
1.1.8.10. Unlocking and locking by the switch of blocking of the electric drive of doors
1.1.8.11. "Protection against children" device
1.1.8.12. The warning system about the unblocked locks
1.1.8.13. The hatch on a roof
1.1.9. Cowl, trunk lid lever, hatch of a mouth of the fuel tank
1.1.10. Power windows of doors
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-1-8-6-zamena-ehlementa-pitaniya-v-besprovodnom-ustrojjstve-distancionnogo-upravleniya.html

1.1.8.6. Replacement of a battery in the wireless device of remote control

For replacement use the lithium CR1616 battery or the battery equivalent to it and the special screw-driver.

Fig. 1.30. Extraction of the module and case of a key


Turn off the screw, then open a cover. Take out the module from the case of a key (fig. 1.30).

Fig. 1.31. Removal of a cover from the module of the wireless device


Remove two screws for removal of a cover of the module. Take the discharged battery (fig. 1.31).

Fig. 1.32. Installation of a battery in the wireless device


Establish a new battery by the positive plug (fig. 1.32) up.

Fig. 1.33. Installation of a cover of the wireless device of remote control


Establish a cover and fix it by two screws. Before it be convinced that on the module laying is established. Install the module in the case of a key and fix a cover by means of the screw (fig. 1.33).
Having pressed any switch on a wireless key, be convinced that the indicator lamp joins.
After replacement of the rechargeable battery check that the key worked properly.

ATTENTION
Make sure that positive and negative plugs of the battery are located correctly rather each other.

Do not replace the battery with moist hands. Moisture can lead to undesirable corrosion.
Do not touch and do not shift components in the transmitter, otherwise it can interfere with its correct work.
Be careful not to bend an electrode at an insert of the battery and that dust or oil did not stick to the case.
Be attentive: do not lose screws and a sealing ring.
Densely close a cover.

"previous page
1.1.8.5. Unlocking of a trunk lid by means of a key
following page"
1.1.8.7. Registration of an identification code