Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.1.1. Dimensions and new design of a body of the Camry car
1.1.2. Some design features of salon and interior of the new Camry car
1.1.3. Salon and the dashboard of the car – general information
1.1.4. Identification data of the car
1.1.5. Podkapotny space
1.1.6. Technical characteristics of engines
1.1.7. Filling capacities of units and systems, the recommended operational materials
1.1.8. Keys, locks of doors, hatch, anticreeping system
1.1.8.1. System of blocking of the engine
1.1.8.2. Wireless remote device
1.1.8.3. Locking and unlocking of doors
1.1.8.4. Unlocking of a trunk lid
1.1.8.5. Unlocking of a trunk lid by means of a key
1.1.8.6. Replacement of a battery in the wireless device of remote control
1.1.8.7. Registration of an identification code
1.1.8.8. Unlocking and locking of side doors by means of a key
1.1.8.9. Unlocking and locking of side doors button of internal blocking
1.1.8.10. Unlocking and locking by the switch of blocking of the electric drive of doors
1.1.8.11. "Protection against children" device
1.1.8.12. The warning system about the unblocked locks
1.1.8.13. The hatch on a roof
1.1.9. Cowl, trunk lid lever, hatch of a mouth of the fuel tank
1.1.10. Power windows of doors
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-1-8-7-registraciya-opoznavatelnogo-koda.html

1.1.8.7. Registration of an identification code

The mode of addition is used to keep already registered codes, at the same time registering new codes. This mode is used to add the new transmitter if necessary. If the number of the registered codes exceeds 4, then earlier registered codes respectively will be erased as it should be, since the first registered code.
The mode of rewriting is used to erase all previously registered codes and to register only new codes. This mode is used when replacing the transmitter or receiver of the control unit of a door of new.
The mode of the ban is used to erase all registered codes and cancels wireless control of door locks. Use this mode when the transmitter is lost.
The mode of confirmation serves in order that confirm how many codes were already registered before registration of an additional code.
For the correct registration of a code the following conditions have to be satisfied:
the key is not inserted into the ignition lock cylinder;
the door of the driver is OPEN (other doors are CLOSED);
the door of the driver is unblocked.
Execute the operations described below.
Insert and take out a key from the ignition lock cylinder twice during 5 pages.
Close and open the driver's door twice during 40 pages. Then insert a key into the cylinder of the lock of ignition and take out it.
Close and open the driver's door twice during 40 pages. Then insert a key into the cylinder of the lock of ignition and close a door.
Turn the ignition switch from the provision of "LOCK" in the provision of "ON" and back within about one second from 1 to 5 times, depending on the chosen mode. Then take out a key from the ignition lock cylinder.

"previous page
1.1.8.6. Replacement of a battery in the wireless device of remote control
following page"
1.1.8.8. Unlocking and locking of side doors by means of a key