Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.2.1. Dashboard
1.2.2. Devices, counters and control indicators
1.2.3. Understeering switches and system of lighting
1.2.3.1. System of automatic switching off of lighting
1.2.3.2. Independent adjustment of light bunches of headlights of head light
1.2.3.3. Preparation for adjustment of light of headlights (with use of the screen)
1.2.3.4. Check of adjustment of headlights
1.2.3.5. Adjustment of headlights
1.2.3.6. Switching mode "distant-near" light of headlights
1.2.3.7. Regulator of level of light of headlights
1.2.3.8. Alarm system
1.2.3.9. Dashboard illumination regulator
1.2.3.10. Forward fog lights
1.2.3.11. Back fog lights
1.2.3.12. Illumination of salon
1.2.3.13. System of lighting at an entrance
1.2.3.14. Ignition lock illumination
1.2.3.15. Individual illuminations
1.2.3.16. Screen wipers and windscreen washer of a windshield
1.2.3.17. Cleaners of headlights
1.2.3.18. Heaters of back glass and external rear-view mirrors
1.2.4. Equipment of salon, wheel and rear-view mirrors
1.2.5. Seats
1.2.6. Systems of passive safety
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-2-3-4-proverka-regulirovki-far.html

1.2.3.4. Check of adjustment of headlights

1. Close a headlight or separate the corresponding electric socket to prevent influence of light of a headlight which is not checked at present, for a headlight which check of adjustment is made.

ATTENTION
You do not hold a headlight closed within more than 3 min. The lens of a headlight is made of synthetic polymer, and can easily be melted off or sustain damage owing to heating.

When checking lamps of driving beam close a lamp of passing beam or separate the corresponding socket.
2. Start the engine. At the same time the frequency of rotation of the crankshaft of the engine has to make not less than 1 500 min.-1.
3. Install the switch of the proofreader of headlights in situation 0 (zero).

Fig. 1.59. Scheme of adjustment of borders of light spots of headlights of head light


4. Include a headlight and make sure that the border of light spots of headlights gets to the area shown in the figure 1.59.
Data for adjustment are given below.
Distance to the screen – 25 m.
the border of light spots of headlights from 48 to 696 mm is lower than the line H for passing beam.
Distance to the screen – 3 m.
the border of light spots of headlights is from 6 mm to 84 mm lower than the line H for passing beam.
Distance to the screen – 25 m.
the border of light spots of headlights is 249 mm lower than the line H for passing beam.
Distance to the screen – 3 m.
The border of light spots of headlights is 30 mm lower than the line H with for passing beam.
As passing beam and driving beam are integrated in a headlight, if passing beam is adjusted correctly, and distant has to be adjusted correctly. However, check both headlights to make sure of correctness of adjustment.

"previous page
1.2.3.3. Preparation for adjustment of light of headlights (with use of the screen)
following page"
1.2.3.5. Adjustment of headlights