Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.2.1. Dashboard
1.2.2. Devices, counters and control indicators
1.2.3. Understeering switches and system of lighting
1.2.4. Equipment of salon, wheel and rear-view mirrors
1.2.5. Seats Front seats Back seats Folding of a back seat System of heating of seats (additional equipment) Forward and back head restraints
1.2.6. Systems of passive safety
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment


1-2-5-2-1-skladyvanie-zadnego-sidenya.html Folding of a back seat

Fig. 1.96. Retracting buckles of belts of safety

Lay buckles of seat belts of back side seats, as shown in the figure 1.96.
1. Pull the blocking lever of safety 1 in the provision of an unblocking up.
2. Pull the button of an unblocking 2.

Fig. 1.97. Folding of a back seat

3. Put a back seat (fig. 1.97).
Each seat can be put separately. It will lead to increase in volume of a luggage carrier up to front seats.
At installation of seats back in vertical position observe the following precautionary measures to prevent getting injured at a sudden stop or collision.
– Make sure that the seat is fixed, for this purpose move a seatback for the top part of a seat forward and back; also be convinced that the red mark in the button in the top part of a seat is not visible. Failure to follow this requirement interferes with operation of a seat belt properly.
– Make sure that seat belts are not overwound or are not jammed under a seat, and are in proper position and are ready to use.

"previous page Back seats
following page" System of heating of seats (additional equipment)