Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.4.1. The recommended fuel
1.4.2. Governing bodies and work with them
1.4.2.1. The ignition lock with steering blocking
1.4.2.2. Automatic transmission
1.4.2.3. Mechanical transmission
1.4.2.4. Control system of draft
1.4.2.5. Usual mode of the movement
1.4.2.6. Driving with the draft which is switched off by a control system
1.4.2.7. System of stabilization of course stability of the car
1.4.2.8. Control lamp of system of stabilization of course stability of "VSC"
1.4.2.9. Parking brake
1.4.2.10. Adjustment of a pedal and/or lever of the parking brake system
1.4.2.11. System of course stability (cruise control)
1.4.2.12. Inclusion of system of course stability
1.4.2.13. Task of the necessary speed
1.4.2.14. Cancellation of previously set speed
1.4.2.15. Task of higher speed
1.4.2.16. Task of lower speed
1.4.2.17. Renewal of previously set speed
1.4.2.18. Warning of malfunction of system of course stability
1.4.3. Information on working systems of the CAMRY car
1.4.4. Start of the engine and driving of the car
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-4-2-13-zadanie-nuzhnojj-skorosti.html

1.4.2.13. Task of the necessary speed

On cars with the automatic transmission before a speed task a cruise control the lever of the selector has to be installed in situation "D".

Fig. 1.135. Control lever speed task modes system of course stability


Accelerate the car to the necessary speed, press the lever down, in the direction of the inscription "-SET", and release. It will allow to install the car on this speed. If this speed does not arrange, take away the lever for increase in speed up or take away it for reduction of speed down. Each branch changes the established speed to 1,6 km/h. Then it is possible to take away a leg from a pedal of an accelerator (fig. 1.135).
If it is necessary to accelerate the movement, for example when overtaking, press an accelerator pedal so that the speed of the car exceeded the set speed. At a pedal otpuskaniye the speed of the car will return to the speed established before acceleration.

ATTENTION
For mechanical transmissions: at the movement with included in a cruise control do not switch to neutral transfer without pressing of a pedal of coupling as it can cause a rating or operation of the engine on too high turns.

"previous page
1.4.2.12. Inclusion of system of course stability
following page"
1.4.2.14. Cancellation of previously set speed