Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.4.1. The recommended fuel
1.4.2. Governing bodies and work with them
1.4.3. Information on working systems of the CAMRY car
1.4.3.1. Three-channel catalytic converters
1.4.3.2. Precautionary measures of rather exhaust gases of the engine
1.4.3.3. An oil consumption in the engine
1.4.3.4. Spark plugs with iridic tips
1.4.3.5. Brake system
1.4.3.6. Brake amplifier
1.4.3.7. Adjustment of height of provision of a pedal of a brake
1.4.3.8. Check of a free wheeling of a pedal of a brake
1.4.3.9. Check of size of a stock of the course of a pedal of a brake
1.4.3.10. Atiblokirovochny system of brakes (ABS)
1.4.3.11. Control lamp of atiblokirovochny system of brakes (ABS)
1.4.3.12. Parking brake system of drum and disk type
1.4.3.13. Auxiliary brake system
1.4.3.14. Indication of wear of brake slips
1.4.4. Start of the engine and driving of the car
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-4-3-7-regulirovka-vysoty-polozheniya-pedali-tormoza.html

1.4.3.7. Adjustment of height of provision of a pedal of a brake

Fig. 1.138. Scheme of adjustment of height of a pedal of a brake


Check and adjust height of a pedal of a brake (fig. 1.138).
Check brake pedal height.
Pedal height from a floor: 144,1–154,1 mm.
Adjust brake pedal height.
Remove the lower overlay of the dashboard.
Disconnect the socket from the switch of signals of braking.
Weaken a lock-nut of the switch of signals of braking and remove the switch of signals of braking.
Weaken a collar lock-nut.
Adjust pedal height rotation of a pusher of a pedal.
Tighten a pusher lock-nut.
Inhaling moment: 26 N · m (265 kgfs · cm).
Install the switch of signals of braking.
Connect the socket of the switch of signals of braking.
Drown a brake pedal on 5–10 mm, turn the switch of signals of braking to block a nut in situation where lamps of signals of braking die away.
After installation drown a brake pedal on 5–10 mm and be convinced that lamps of signals of braking light up.
Establish the lower overlay of the dashboard.

"previous page
1.4.3.6. Brake amplifier
following page"
1.4.3.8. Check of a free wheeling of a pedal of a brake