Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.6.1. Data on maintenance
1.6.2. Schedule of maintenance
1.6.3. Independent maintenance of the car
1.6.3.1. Check of level of oil in the engine
1.6.3.2. Replacement of an oil filter on the car with the engine 1AZ-FE and 2AZ-FE
1.6.3.3. Check of level of cooling liquid of the engine
1.6.3.4. Check of a radiator and condenser
1.6.3.5. Check of pressure in tires
1.6.3.6. Check of tires
1.6.3.7. Replacement of tires
1.6.3.8. Rotation of tires
1.6.3.9. Check of a condition of the rechargeable battery
1.6.3.10. External examination of the rechargeable battery
1.6.3.11. Precautionary measures at recharge of the rechargeable battery
1.6.3.12. Addition of windshield washer fluid
1.6.3.13. Replacement of lamps
1.6.3.14. Replacement of lamps of passing beam
1.6.3.15. Replacement of lamps of driving beam
1.6.3.16. Replacement of lamps of parking lamps
1.6.3.17. Replacement of lamps of lamps of forward indexes of turns
1.6.3.18. Replacement of lamps of lamps of side indexes of turns
1.6.3.19. Replacement of lamps of lamps of back indexes of turn, stoplights / back lamps, back lamps, lamps of a backing and back fog lights
1.6.3.20. Fuses
1.6.3.21. Check and replacement of fuses
1.6.4. Care of a body and interior of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-6-3-13-zamena-lamp.html

1.6.3.13. Replacement of lamps

When replacing a lamp be convinced that ignition and switches of lighting are switched off. Use lamps with the rated power specified in the table.

ATTENTION
For prevention of receiving a burn do not replace a lamp while they are hot.
In halogen lamps there is a gas under pressure therefore the special address with these lamps is required. They can blow up or break if are scratched or will fall. Surely you hold a lamp for the plastic or metal case. Do not touch barehanded a glass part of a lamp.

The inside of the lens of external illumination, for example, of headlights, can temporarily mist over when the lens becomes wet during a rain or in an automobile sink. It is not a problem because fogging happens because of a difference of temperatures between external and an internal part of the lens, like fogging of a windshield at a rain.
А: Halogen lamps of H7;
В: Halogen lamps of NVZ;
С: Halogen lamps of HB4;
D: Lamps with a bayonetny socle
(transparent);
Е: Lamps with a bayonetny socle (yellow);
F: Lamps with a knife socle.

"previous page
1.6.3.12. Addition of windshield washer fluid
following page"
1.6.3.14. Replacement of lamps of passing beam