Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.6.1. Data on maintenance
1.6.2. Schedule of maintenance
1.6.3. Independent maintenance of the car
1.6.3.1. Check of level of oil in the engine
1.6.3.2. Replacement of an oil filter on the car with the engine 1AZ-FE and 2AZ-FE
1.6.3.3. Check of level of cooling liquid of the engine
1.6.3.4. Check of a radiator and condenser
1.6.3.5. Check of pressure in tires
1.6.3.6. Check of tires
1.6.3.7. Replacement of tires
1.6.3.8. Rotation of tires
1.6.3.9. Check of a condition of the rechargeable battery
1.6.3.10. External examination of the rechargeable battery
1.6.3.11. Precautionary measures at recharge of the rechargeable battery
1.6.3.12. Addition of windshield washer fluid
1.6.3.13. Replacement of lamps
1.6.3.14. Replacement of lamps of passing beam
1.6.3.15. Replacement of lamps of driving beam
1.6.3.16. Replacement of lamps of parking lamps
1.6.3.17. Replacement of lamps of lamps of forward indexes of turns
1.6.3.18. Replacement of lamps of lamps of side indexes of turns
1.6.3.19. Replacement of lamps of lamps of back indexes of turn, stoplights / back lamps, back lamps, lamps of a backing and back fog lights
1.6.3.20. Fuses
1.6.3.21. Check and replacement of fuses
1.6.4. Care of a body and interior of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-6-3-14-zamena-lamp-blizhnego-sveta.html

1.6.3.14. Replacement of lamps of passing beam

1. Open a cowl. Disconnect the socket, pressing unblockings the button. Turn a lamp counterclockwise and take it.
2. Release a lock spring of a lamp and take out a lamp. Disconnect the socket and establish a new lamp. Establish a lock spring of a lamp in a starting position.
If the socket hard, then shake it. For installation of a lamp combine lamp ledges with cuts of an assembly opening.
3. Establish a lamp and turn clockwise. Insert the socket into a lamp.

Fig. 1.167. Scheme of a zemena of lamps of passing beam


After replacement of a lamp adjustment is not obligatory.

"previous page
1.6.3.13. Replacement of lamps
following page"
1.6.3.15. Replacement of lamps of driving beam