Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.6.1. Data on maintenance
1.6.2. Schedule of maintenance
1.6.3. Independent maintenance of the car
1.6.3.1. Check of level of oil in the engine
1.6.3.2. Replacement of an oil filter on the car with the engine 1AZ-FE and 2AZ-FE
1.6.3.3. Check of level of cooling liquid of the engine
1.6.3.4. Check of a radiator and condenser
1.6.3.5. Check of pressure in tires
1.6.3.6. Check of tires
1.6.3.7. Replacement of tires
1.6.3.8. Rotation of tires
1.6.3.9. Check of a condition of the rechargeable battery
1.6.3.10. External examination of the rechargeable battery
1.6.3.11. Precautionary measures at recharge of the rechargeable battery
1.6.3.12. Addition of windshield washer fluid
1.6.3.13. Replacement of lamps
1.6.3.14. Replacement of lamps of passing beam
1.6.3.15. Replacement of lamps of driving beam
1.6.3.16. Replacement of lamps of parking lamps
1.6.3.17. Replacement of lamps of lamps of forward indexes of turns
1.6.3.18. Replacement of lamps of lamps of side indexes of turns
1.6.3.19. Replacement of lamps of lamps of back indexes of turn, stoplights / back lamps, back lamps, lamps of a backing and back fog lights
1.6.3.20. Fuses
1.6.3.21. Check and replacement of fuses
1.6.4. Care of a body and interior of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-6-3-2-zamena-maslyanogo-filtra-na-avtomobile-s-dvigatelem-1az-fe-i-2az-fe.html

1.6.3.2. Replacement of an oil filter on the car with the engine 1AZ-FE and 2AZ-FE

Uncover an oil-filling mouth.
Remove a stopper of a masloslivny opening and merge oil in a container.

Fig. 1.165. Removal of an oil filter


Using special adaptation 09228-06501, remove an oil filter. (fig. 1.165).
Check and clear the surface of installation of an oil filter.
Apply pure engine oil on laying of a new oil filter.
Slightly wrap an oil filter into place, and tighten it to a contact of laying of a landing surface.

Fig. 1.166. Installation of a new oil filter


Using special adaptation 09228-06501, wrap the filter in addition on 3/4 turns (fig. 1.166).
Clear and establish into place a stopper of a masloslivny opening with new laying. Inhaling moment: 25 N · m (255 kgfs · cm).
Fill in fresh engine oil.
Establish a cover of an oil-filling mouth.
Check whether oil leaks.

ATTENTION
– The long and repeated contact with mineral oil leads to removal from the surface of skin of natural fats that leads to dryness of skin, irritation and dermatitis. Besides, the fulfilled engine oil contains potentially harmful substances which can cause skin cancer.
– Show care to minimize duration and frequency of contact of your skin with the fulfilled oil. Put on protective clothes and gloves. Carefully wash skin with water with soap, or use waterless hand cleaner to remove the fulfilled engine oil. Do not use gasoline, thinners or solvents.

For environment protection the fulfilled oil and the used oil filter needs to be handed over only on points of utilization intended for this purpose.

"previous page
1.6.3.1. Check of level of oil in the engine
following page"
1.6.3.3. Check of level of cooling liquid of the engine