Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.6.1. Data on maintenance
1.6.2. Schedule of maintenance
1.6.3. Independent maintenance of the car
1.6.3.1. Check of level of oil in the engine
1.6.3.2. Replacement of an oil filter on the car with the engine 1AZ-FE and 2AZ-FE
1.6.3.3. Check of level of cooling liquid of the engine
1.6.3.4. Check of a radiator and condenser
1.6.3.5. Check of pressure in tires
1.6.3.6. Check of tires
1.6.3.7. Replacement of tires
1.6.3.8. Rotation of tires
1.6.3.9. Check of a condition of the rechargeable battery
1.6.3.10. External examination of the rechargeable battery
1.6.3.11. Precautionary measures at recharge of the rechargeable battery
1.6.3.12. Addition of windshield washer fluid
1.6.3.13. Replacement of lamps
1.6.3.14. Replacement of lamps of passing beam
1.6.3.15. Replacement of lamps of driving beam
1.6.3.16. Replacement of lamps of parking lamps
1.6.3.17. Replacement of lamps of lamps of forward indexes of turns
1.6.3.18. Replacement of lamps of lamps of side indexes of turns
1.6.3.19. Replacement of lamps of lamps of back indexes of turn, stoplights / back lamps, back lamps, lamps of a backing and back fog lights
1.6.3.20. Fuses
1.6.3.21. Check and replacement of fuses
1.6.4. Care of a body and interior of the car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-6-3-21-proverka-i-zamena-plavkikh-predokhranitelejj.html

1.6.3.21. Check and replacement of fuses

Fig. 1.174. Examples of the fused and normal fuses


If headlights or other electric components do not work, then check fuses. If any fuses fused, then they need to be replaced (fig. 1.174).
Switch off ignition and idle components. Extend on yourself the fuse and check it.
Define what of fuses is faulty. On a cover of the block of fuses the name of a chain of each fuse is shown.
Fuses of A type can be taken by means of a stripper. The location of a stripper is shown in the drawing.
If you are not sure that the safety lock fused, try to replace this safety lock with it of which serviceability you are sure.
If the fuse fused, install the new fuse in a clip.
Install the fuse only with the nominal current specified on a cover of the block of fuses.
If there is no spare fuse, then in emergency situation it is possible to extend the safety lock "MIR HTR", "CIG" or "POWER POINT" which are not of great importance for normal driving and to use if it has the same nominal current.
If there is no opportunity to use the fuse with the same nominal current, then use that which has lower value, but as it is possible closer to nominal. If the nominal rate of current is lower, than specified, the fuse can fuse again, but it is not a sign of any problem. Surely as soon as possible try to buy the corresponding fuse and to return the safety lock replacing it to an initial clip.
It is recommended to buy a set of spare fuses and to store it in the car for emergencies.
If the new safety lock at once fuses, then it indicates existence of a problem in electric system.

ATTENTION
It is forbidden to use the fuse with higher nominal current or to use any subject instead of a safety lock. It can cause serious damage and lead to the fire.

"previous page
1.6.3.20. Fuses
following page"
1.6.4. Care of a body and interior of the car