Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
1.1. Description of the car
1.2. Dashboard, governing bodies and combination of devices
1.3. System of heating and air conditioning
1.4. Use of the car to destination
1.5. Elimination of the malfunctions which arose in way or before a start of motion
1.6. Maintenance of the car
1.6.1. Data on maintenance
1.6.2. Schedule of maintenance
1.6.3. Independent maintenance of the car
1.6.4. Care of a body and interior of the car
1.6.4.1. Protection against corrosion
1.6.4.2. Prevention of corrosion
1.6.4.3. Sink and putting wax paste
1.6.4.4. Removal of spots
1.6.4.5. Polishing and putting wax paste
1.6.4.6. Repeated putting wax paste
1.6.4.7. Care of bumpers
1.6.4.8. Cleaning of interior of the car
1.6.4.9. Cleaning of an upholstery from genuine leather (the additional equipment)
1.6.4.10. Cleaning of carpets
1.6.4.11. Cleaning of seat belts
1.6.4.12. Sink of glasses
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

1-6-4-3-mojjka-i-nanesenie-voskovojj-pasty.html

1.6.4.3. Sink and putting wax paste

The wash of the car when its surface is heated by sunshine, is inadmissible. Always wash the car in a shadow.
Wash the car as often as possible. Dirt is abrasive material and can scratch the car if not to wash away it. The polluted air or an acid rain can damage a paint and varnish covering during chemical reaction if to leave their deposit to contact to the surface of the car. If you live by the sea or in the region (country) where road salt or chemicals for care of roads is used, you have to pay special attention to the bottom of your car.
In winter time or after driving on the dirty wet road carefully wash out the car bottom. to remove stratifications of dirt and corrosion and active materials, use a strong stream of water. Use high-quality shampoo for a wash of the car and follow instructions of his manufacturer on packing. Shampoo can be bought from the official dealer of Hyundai or in autoshop. Do not use strong household cleaners, gasoline, solvents and abrasive cleaners as it can damage a paint and varnish covering of the car. Use a pure sponge or fabric, often moistening it, and do not damage a paint and varnish covering too strong friction. If dirt dried, plentifully moisten and accurately remove it.
For a sink of wheels use a soft brush or the rag moistened in the neutral washing solution from rough wool.
For cleaning of plastic wheel caps use a pure sponge or soft fabric and water.
Wash aluminum rims with the weak neutral washing solution or neutral detergent. Do not use abrasive cleaners. Protect the unprotected metal surfaces by a sink, polishings and putting wax paste. As aluminum is subject to corrosion, pay to aluminum rims special attention in the winter. After driving on the roads covered with salt carefully wash such rims.
After a wash of the car carefully wipe it. After drying soap water leaves stains on paint.
At warm weather and low humidity perhaps you will need to wipe each detail of the car after a sink at once not to leave stains on paint.
After rubbing wipe the car dry. It is necessary for removal of water from a paint and varnish covering on it there were no spots. Do not rub strongly, it can damage a paint and varnish covering.
At detection of dents or scratches on a paint and varnish covering cover them with repair paint to prevent emergence of corrosion. For protection of a paint and varnish covering against corrosion you have to wash the car at least once a month. Pay special attention to removal of salt, dirt and other substances from under car wings. Make sure that drainage openings are free. Damage of a paint and varnish covering can be caused by tar spots, production emissions, charcoal and remains of insects if all this is not removed immediately. If simple water is insufficiently effective for removal of the collected dirt, use neutral solutions for a car wash. For removal of solution after a sink surely wipe the car. Do not allow drying of solution on a paint and varnish covering of the car.

"previous page
1.6.4.2. Prevention of corrosion
following page"
1.6.4.4. Removal of spots