Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.1.1. General information
2.1.2. Mechanism of the drive of valves
2.1.3. Lubrication system
2.1.4. Cooling system
2.1.5. System of an admission and vyspusk
2.1.6. Fuel system
2.1.7. System of ignition
2.1.8. System of start-up
2.1.9. Starter
2.1.10. Control system of the engine
2.1.10.1. Arrangement of basic elements of a control system of the engine
2.1.10.2. Air consumption sensor
2.1.10.3. Sensor of an angle of rotation of a bent shaft
2.1.10.4. Sensor of provision of a cam-shaft
2.1.10.5. Sensor of provision of a butterfly valve
2.1.10.6. Sensor of provision of a pedal of management of fuel supply
2.1.10.7. EFI system (Electronic system of injection of fuel)
2.1.10.8. The ETCS-i system (an intellectual control system of a butterfly valve with the electric drive)
2.1.10.9. Principle of work
2.1.10.10. Protection against shock loadings at gear shifting
2.1.10.11. System of automatic control of speed of the movement
2.1.10.12. VVT-i system (Intellectual management of gas distribution phases)
2.1.10.13. Control of the cooling system fan
2.1.10.14. Diagnostics of operation of the fan of the cooling system
2.1.10.15. Management of reliability
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-1-10-3-datchik-ugla-povorota-kolenchatogo-vala.html

2.1.10.3. Sensor of an angle of rotation of a bent shaft

Fig. 2.43. Sensor of an angle of rotation of a bent shaft: 1 – synchronization rotor; 2 – sensor of an angle of rotation of a bent shaft; 3 – synchronization rotor (720 °CA); 4 – the absent teeths


The rotor of synchronization of a bent shaft has 34 teeth, 2 teeth – are absent. The sensor of an angle of rotation of a bent shaft (see fig. 2.43) removes signals of rotation of a bent shaft everyone 10 °, missing teeths are used for definition of the top dead point.

"previous page
2.1.10.2. Air consumption sensor
following page"
2.1.10.4. Sensor of provision of a cam-shaft