Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.2.1. General information and safety measures on removal of the power unit
2.2.2. Removal of sealant
2.2.3. The specification of types of the applied nuts and bolts
2.2.4. Service of a mechanical part of the engine
2.2.5. General repair operations
2.2.5.1. Removal of an oil filter
2.2.5.2. Removal of a pulley of a bent shaft
2.2.5.3. Removal of the pump of cooling liquid
2.2.5.4. Removal of the oil pallet
2.2.5.5. Dismantling of working components of the drive of the mechanism of gas distribution
2.2.5.6. Removal of a chain of the drive of the oil pump
2.2.5.7. Removal of the oil pump
2.2.5.8. Removal of covers and bearing of the camshaft
2.2.5.9. Removal of a head of the block of cylinders, check of an axial side play of balancer shafts
2.2.5.10. Check of a radial side play of balancer shafts
2.2.5.11. Removal of balancer shafts
2.2.5.12. Replacement of a back epiploon of a bent shaft
2.2.5.13. Check of a chain of the drive of the mechanism of a gazorspredeleniye and asterisk of shaft
2.2.5.14. Check of work of a natyazhitel of a chain of the mechanism of a gazorspredeleniye
2.2.5.15. Check of a beating of a cam-shaft
2.2.5.16. Check of height of a cam of a cam-shaft
2.2.5.17. A gap in cam-shaft necks (outer diameter of a neck of a cam-shaft)
2.2.5.18. Installation of an asterisk of WT (camshaft of inlet valves)
2.2.6. Dismantling, check and assembly of a head of the block of cylinders
2.2.7. Dismantling, check and assembly of the block of cylinders
2.2.8. General assembly
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-2-5-1-snyatie-maslyanogo-filtra.html

2.2.5.1. Removal of an oil filter

Turn off a cover of a maslozalivny mouth.
Remove the PCV valve.
Turn out spark plugs.

Fig. 2.53. Removal of an oil filter: 1 – special tool


Remove an oil filter by means of the special tool 09228-06501 (fig. 2.53).
Turn off a nut and the union, remove ring consolidation from the oil heater, remove a radiator.

Fig. 2.54. Removal of a cover of a head of the block of cylinders


Uncover a head of the block of cylinders with laying, having turned off eight bolts and two nuts shown by shooters in the figure 2.54.

"previous page
2.2.5. General repair operations
following page"
2.2.5.2. Removal of a pulley of a bent shaft