Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.2.1. General information and safety measures on removal of the power unit
2.2.2. Removal of sealant
2.2.3. The specification of types of the applied nuts and bolts
2.2.4. Service of a mechanical part of the engine
2.2.5. General repair operations
2.2.6. Dismantling, check and assembly of a head of the block of cylinders
2.2.6.1. Dismantling of a head of the block of cylinders
2.2.6.2. Check of a head of the block of cylinders
2.2.6.3. Check of saddles of valves
2.2.6.4. Check of an axial side play of the camshaft
2.2.6.5. Check of a radial side play in camshaft bearings
2.2.6.6. Check of a valvate spring
2.2.6.7. Check of length of the valve
2.2.6.8. Check of thickness of a plate of the valve
2.2.6.9. Measurement of diameter of a rod of the valve
2.2.6.10. Check of internal diameters of the directing plugs of valves
2.2.6.11. Check of pushers and boring under pushers in the case of a head of the block of cylinders
2.2.6.12. Assembly of a head of the block of cylinders
2.2.7. Dismantling, check and assembly of the block of cylinders
2.2.8. General assembly
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-2-6-12-sborka-golovki-bloka-cilindrov.html

2.2.6.12. Assembly of a head of the block of cylinders

Fig. 2.92. Oil scraper caps of inlet and final valves and their installation: 1 – special tool


By means of the special tool 09201-41020 establish new oil scraper caps. Oil scraper caps of inlet valves are painted in cheny, and oil scraper caps of final valves – in gray color (fig. 2.92).
Establish details in the following order:
1 – valve;
2 – spring saddle;
3 – spring;
4 – plate of a spring.

Fig. 2.93. Installation of a cracker around a valve rod: 1 – special tool; 2 – wooden whetstones


By means of the special tool 09202-70020 squeeze a valvate spring and establish two crackers around a core of the valve (fig. 2.93).

Fig. 2.94. Fixing of the valve crackers: 1 – insulating tape; 2 – valve rod


With plastic brisk and the core of not used valve which is wrapped up by an insulating tape strike with the hammer a valve core end face to provide reliable fixing of the valve with crackers (fig. 2.94).
Establish pushers of valves and be convinced that pushers freely rotate.
Install the sensor of position of the camshaft with the moment of an inhaling of 9 N · to m.
Install the sensor of temperature of cooling liquid with the moment of an inhaling of 20 N · to m.
Install the oil pressure sensor, having applied sealant on 2–3 rounds of a carving with the moment of an inhaling of 13 N · to m.

"previous page
2.2.6.11. Check of pushers and boring under pushers in the case of a head of the block of cylinders
following page"
2.2.7. Dismantling, check and assembly of the block of cylinders