Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.2.1. General information and safety measures on removal of the power unit
2.2.2. Removal of sealant
2.2.3. The specification of types of the applied nuts and bolts
2.2.4. Service of a mechanical part of the engine
2.2.5. General repair operations
2.2.6. Dismantling, check and assembly of a head of the block of cylinders
2.2.7. Dismantling, check and assembly of the block of cylinders
2.2.8. General assembly
2.2.8.1. Installation of balancer shafts
2.2.8.2. Installation of a case
2.2.8.3. Installation of bolts of fastening of a head of the block of cylinders
2.2.8.4. Installation of an asterisk VVT-i
2.2.8.5. Installation of camshafts
2.2.8.6. Installation of the oil pump
2.2.8.7. Installation of an asterisk and chain of the drive of the oil pump
2.2.8.8. Installation of the piston of the cylinder No. 1 in VMT of the end of a step of compression
2.2.8.9. Installation of a chain of the drive of the mechanism of gas distribution
2.2.8.10. Installation of a rotor of the sensor of provision of a bent shaft
2.2.8.11. Installation of a cover of a chain of the drive of the mechanism of gas distribution
2.2.8.12. Installation of the oil pallet
2.2.8.13. Installation of the pump of cooling liquid
2.2.8.14. Installation of the sensor of provision of a bent shaft
2.2.8.15. Installation of a pulley of a bent shaft
2.2.8.16. Installation of the mechanism of a natyazhitel of a chain of the drive of the mechanism of gas distribution
2.2.8.17. Convertion of a natyazhitel of a chain of the drive of the mechanism of gas distribution in the working condition
2.2.8.18. Installation поршеня the first and fourth cylinders in compression step VMT
2.2.8.19. Final assembly of the unit
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-2-8-7-ustanovka-zvezdochki-i-cepi-privoda-maslyanogo-nasosa.html

2.2.8.7. Installation of an asterisk and chain of the drive of the oil pump

Fig. 2.149. Installation of a shaft of the drive of the oil pump


For installation of a chain of the drive of the oil pump and an asterisk establish a bent shaft by a spline to the left, and a shaft of the oil pump – a cut up, as shown in the drawing (fig. 2.149).

Fig. 2.150. The correct installation of a chain on asterisks


Establish a chain on asterisks, having combined links with color tags and tags on asterisks (fig. 2.150).

Fig. 2.151. Installation of a natyazhitel of a chain of the drive of the oil pump


Establish asterisks on shaft and temporarily tighten a fastening nut. Establish a natyazhitel of a chain of the drive of the oil pump, having inserted a spring of a natyazhitel into an opening (fig. 2.151).
Tighten a nut of fastening of a natyazhitel the moment of an inhaling of 12 N · m.

Fig. 2.152. Combination of an opening of a shaft of the drive of the oil pump with a pump groove


Combine an opening of a shaft of the drive of the oil pump with a pump groove, as shown in the figure 2.152.
Insert a pin with a diameter of 4 mm into an opening of a shaft and, having recorded it, wrap a nut the moment of an inhaling of 30 N · m.

Fig. 2.153. Correct orientation of a spline of a shaft of the drive of the oil pump


Turn a bent shaft on 90 ° clockwise, having oriented a shaft spline vertically up (fig. 2.153).
Establish an asterisk of a bent shaft.

"previous page
2.2.8.6. Installation of the oil pump
following page"
2.2.8.8. Installation of the piston of the cylinder No. 1 in VMT of the end of a step of compression