Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.3.1. General information
2.3.1.1. Distinctive features of the engine of model 1MZ-FE
2.3.1.2. Cover of a head of the block of cylinders
2.3.1.3. Laying of a head of the block of cylinders
2.3.1.4. Head of the block of cylinders
2.3.1.5. Block of cylinders
2.3.1.6. Piston
2.3.1.7. Rod
2.3.1.8. Bent shaft
2.3.1.9. Pulley of a bent shaft
2.3.2. Mechanism of the drive of valves
2.3.3. Lubrication system
2.3.4. Cooling system
2.3.5. System of an admission and vyspusk
2.3.6. Fuel system
2.3.7. System of ignition
2.3.8. Control system of the engine
2.3.9. Basic elements of a control system of the engine
2.4. Mechanical part of the engine of model 1MZ-FE
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-3-1-7-shatun.html

2.3.1.7. Rod

Fig. 2.184. Rod: 1 – pin; 2 – a bolt with the inhaling moment in a plasticity zone


Rods (fig. 2.184) are made of high-strength steel for decrease in weight. Conrod bearings – aluminum with a covering. Conrod bolts with the inhaling moment in a plasticity zone are used. The interfaced surfaces of a rod and a cover have openings for adjusting pins to minimize shift of conrod covers at assembly.

"previous page
2.3.1.6. Piston
following page"
2.3.1.8. Bent shaft