Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.4.1. Service of a mechanical part of the engine
2.4.2. Check and adjustment of thermal gaps in valves
2.4.2.1. Beginning of work
2.4.2.2. Removal of a cover of a head of the block of cylinders
2.4.2.3. Installation of the piston of the 1st cylinder in compression step VMT
2.4.2.4. Check of thermal gaps in valves
2.4.2.5. Adjustment of thermal gaps in valves
2.4.3. Removal, check and installation of a belt of the drive of the mechanism of gas distribution (GRM)
2.4.4. Removal of a head of the block of cylinders
2.4.5. Dismantling of a head of the block of cylinders
2.4.6. Assembly of a head of the block of cylinders
2.4.7. Installation of a head of the block of cylinders
2.4.8. Dismantling, check and assembly of the block of cylinders
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-4-2-1-nachalo-raboty.html

2.4.2.1. Beginning of work

Using a face key on 5 mm, turn off two nuts and remove a protective cover of the engine.

Fig. 2.221. Removal of the top part of an inlet collector


Using a face key on 8 mm remove the top part of an inlet collector (fig. 2.221).
Remove ignition coils. Turn out spark plugs.
Uncover heads of the block of cylinders.
Disconnect high-voltage wires from spark plugs, holding them only for rubber tips.

"previous page
2.4.2. Check and adjustment of thermal gaps in valves
following page"
2.4.2.2. Removal of a cover of a head of the block of cylinders