Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.4.1. Service of a mechanical part of the engine
2.4.2. Check and adjustment of thermal gaps in valves
2.4.2.1. Beginning of work
2.4.2.2. Removal of a cover of a head of the block of cylinders
2.4.2.3. Installation of the piston of the 1st cylinder in compression step VMT
2.4.2.4. Check of thermal gaps in valves
2.4.2.5. Adjustment of thermal gaps in valves
2.4.3. Removal, check and installation of a belt of the drive of the mechanism of gas distribution (GRM)
2.4.4. Removal of a head of the block of cylinders
2.4.5. Dismantling of a head of the block of cylinders
2.4.6. Assembly of a head of the block of cylinders
2.4.7. Installation of a head of the block of cylinders
2.4.8. Dismantling, check and assembly of the block of cylinders
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-4-2-3-ustanovka-porshnya-1-go-cilindra-v-vmt-takta-szhatiya.html

2.4.2.3. Installation of the piston of the 1st cylinder in compression step VMT

Fig. 2.223. Combination risks of a pulley of a bent shaft with marking "0" on a GRM drive belt cover


Rotating a pulley of a bent shaft, combine to risk on a pulley with adjusting marking "0" on a cover of a belt of the GRM drive No. 1 (fig. 2.223).

"previous page
2.4.2.2. Removal of a cover of a head of the block of cylinders
following page"
2.4.2.4. Check of thermal gaps in valves