Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.4.1. Service of a mechanical part of the engine
2.4.2. Check and adjustment of thermal gaps in valves
2.4.3. Removal, check and installation of a belt of the drive of the mechanism of gas distribution (GRM)
2.4.4. Removal of a head of the block of cylinders
2.4.4.1. Preparatory operations
2.4.4.2. Removal of shaft of inlet and final valves
2.4.4.3. Dismantling of camshafts of final valves
2.4.4.4. Removal of heads of the block of cylinders
2.4.5. Dismantling of a head of the block of cylinders
2.4.6. Assembly of a head of the block of cylinders
2.4.7. Installation of a head of the block of cylinders
2.4.8. Dismantling, check and assembly of the block of cylinders
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-4-4-3-razborka-raspredelitelnykh-valov-vypusknykh-klapanov.html

2.4.4.3. Dismantling of camshafts of final valves

Fig. 2.257. Installation of the camshaft in a vice


Install the camshaft for the six-sided site in a vice, as shown in the figure 2.257.

NOTE
Try not to damage the camshaft


Fig. 2.258. Provorachivany auxiliary gear wheel: 1 – special tool


By means of the special tool turn an auxiliary gear wheel clockwise and remove a technological bolt (fig. 2.258).

Fig. 2.259. Removal of a lock ring


Passatizhami remove a lock ring (fig. 2.259).

NOTE
Do not interchange the position of auxiliary gear wheels and spring rings distributive shaft of forward and back heads.

"previous page
2.4.4.2. Removal of shaft of inlet and final valves
following page"
2.4.4.4. Removal of heads of the block of cylinders