Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.4.1. Service of a mechanical part of the engine
2.4.2. Check and adjustment of thermal gaps in valves
2.4.3. Removal, check and installation of a belt of the drive of the mechanism of gas distribution (GRM)
2.4.4. Removal of a head of the block of cylinders
2.4.5. Dismantling of a head of the block of cylinders
2.4.5.1. Removal of valves
2.4.5.2. Cleaning of a head of the block of cylinders
2.4.5.3. Check of a head of the block of cylinders on a buckling
2.4.5.4. Replacement of the valve and the directing plug
2.4.5.5. Check and grinding in of valves
2.4.5.6. Check of a valvate spring
2.4.5.7. Check of a pusher of the valve
2.4.5.8. Check of an axial side play of the camshaft
2.4.5.9. Measurement of a gap in gear gearing of camshafts
2.4.5.10. Check of boring under pushers in the block head case
2.4.5.11. Check of an oil gap in camshaft bearings
2.4.6. Assembly of a head of the block of cylinders
2.4.7. Installation of a head of the block of cylinders
2.4.8. Dismantling, check and assembly of the block of cylinders
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-4-5-1-snyatie-klapanov.html

2.4.5.1. Removal of valves

Before removing valves, remove pushers and adjusting washers. You store pushers and adjusting washers as their installation.

Fig. 2.262. Removal of crackers: 1 – special tool


Using the special tool, squeeze a valvate spring and remove two crackers (fig. 2.262).
Remove a plate valve springs, a valvate spring, the valve and a saddle of a spring. Using flat-nose pliers, remove oil scraper caps.

"previous page
2.4.5. Dismantling of a head of the block of cylinders
following page"
2.4.5.2. Cleaning of a head of the block of cylinders