Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
2.1. Petrol engines models 1AZ-FE and 2AZ-FE
2.2. Mechanical part of engines of models 1AZ-FE and 2AZ-FE
2.3. Petrol engine of model 1MZ-FE
2.4. Mechanical part of the engine of model 1MZ-FE
2.4.1. Service of a mechanical part of the engine
2.4.2. Check and adjustment of thermal gaps in valves
2.4.3. Removal, check and installation of a belt of the drive of the mechanism of gas distribution (GRM)
2.4.4. Removal of a head of the block of cylinders
2.4.5. Dismantling of a head of the block of cylinders
2.4.6. Assembly of a head of the block of cylinders
2.4.7. Installation of a head of the block of cylinders
2.4.7.1. Assembly of camshafts of final valves
2.4.7.2. Installation of camshafts of final valves
2.4.7.3. Installation of the camshaft of inlet valves of a back head of the block
2.4.7.4. Installation of the camshaft of final valves of a back head of the block
2.4.7.5. Installation of the camshaft of inlet valves of a forward head of the block
2.4.7.6. Installation of a cover of heads of the block of cylinders
2.4.7.7. Installation of other components
2.4.8. Dismantling, check and assembly of the block of cylinders
2.5. Appendix
2.6. Tables
3. Transmission
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

2-4-7-1-sborka-raspredelitelnykh-valov-vypusknykh-klapanov.html

2.4.7.1. Assembly of camshafts of final valves

Clamp the camshaft for the six-sided site in a vice. Establish the following details:
1 – spring ring of a gear wheel of the camshaft;
2 – auxiliary gear wheel of the drive of the camshaft;
3 – spring washer.

NOTE
Combine the directing pins on gear wheels with the ends of a spring.

Fig. 2.290. Adjusting components of an inlet shaft






Fig. 2.291. Combination of tags of gear wheels: 1 – special tool; 2 – main gear wheel; 3 – auxiliary gear wheel


Using flat-nose pliers, establish lock rings. Using the screw-driver, combine an opening of the main gear wheel of the drive of the camshaft and an auxiliary gear wheel, turning an auxiliary gear wheel of the drive of the camshaft clockwise, then establish a technological bolt (fig. 2.291).
Combine teeths of the main and auxiliary gear wheel and tighten a technological bolt.

"previous page
2.4.7. Installation of a head of the block of cylinders
following page"
2.4.7.2. Installation of camshafts of final valves