Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.1.1. The control system of switching off of coupling at launch of the engine
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
3.1.1.3. Adjustment of height of provision of a pedal of coupling
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
3.1.1.6. Check of a point of switching off of coupling
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-1-1-sistema-kontrolya-vyklyucheniya-scepleniya-pri-puske-dvigatelya.html

3.1.1.1. The control system of switching off of coupling at launch of the engine

Fig. 3.2. An arrangement of elements of the control system of switching off of coupling at launch of the engine: 1 - starter relay; 2 - coupling pedal switch


This system prevents launch of the engine a starter at the released coupling pedal. Thus, prevention of launch of the engine by the included transfer provides impossibility of an inadvertent start of motion.

Fig. 3.3. The assembly diagram of the control system of switching off of coupling at launch of the engine





"previous page
3.1.1. General information
following page"
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling