Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.1.1. The control system of switching off of coupling at launch of the engine
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
3.1.1.3. Adjustment of height of provision of a pedal of coupling
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
3.1.1.6. Check of a point of switching off of coupling
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-1-3-regulirovka-vysoty-polozheniya-pedali-scepleniya.html

3.1.1.3. Adjustment of height of provision of a pedal of coupling

Examine and adjust a coupling pedal. For this purpose unbend a carpet of a floor and check height of provision of a pedal of coupling.
Height of provision of a pedal from a floor: 159,0–169,0 mm.
If height does not correspond to specified, adjust it.

Fig. 3.5. Scheme of adjustment of a pedal of coupling: 1 – adjustment of height of a pedal; 2 – pusher gap; 3 – pedal course; 4 – pedal height


Weaken a lock-nut and rotate a stopper bolt, the correct height will not be reached yet. Tighten a lock-nut the moment of an inhaling of 25,5 N · m.


"previous page
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
following page"
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher