Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.1.1. The control system of switching off of coupling at launch of the engine
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
3.1.1.3. Adjustment of height of provision of a pedal of coupling
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
3.1.1.6. Check of a point of switching off of coupling
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-1-4-proverka-svobodnogo-khoda-pedali-i-zazora-tolkatelya.html

3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher

If the system of automatic control of speed of the movement is installed, disconnect the coupling switch socket.
Press a pedal till the moment, you will not feel the beginning of resistance of coupling yet.
The free wheeling of a pedal has to be: 5.0–15.0 mm.
Softly press a pedal until resistance begins to increase a little. Check a pusher gap.

Fig. 3.6. Scheme of adjustment of a free wheeling of a pedal of coupling


Pusher gap at the top provision of a pedal: 1.0–5.0 mm.


"previous page
3.1.1.3. Adjustment of height of provision of a pedal of coupling
following page"
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher