Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.1.1. The control system of switching off of coupling at launch of the engine
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
3.1.1.3. Adjustment of height of provision of a pedal of coupling
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
3.1.1.6. Check of a point of switching off of coupling
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-1-5-regulirovka-svobodnogo-khoda-pedali-i-zazora-tolkatelya.html

3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher

Remove the top part of the dashboard.
Remove the left lower insert of the dashboard.
Disconnect an air duct.
Weaken a lock-nut and rotate a pusher before achievement of the correct free wheeling and a gap of a pusher.
Tighten a lock-nut.
After adjustment of a free wheeling of a pedal check pedal height.
Connect an air duct.
Establish the left lower insert of the dashboard.
Establish the top part of the dashboard.

"previous page
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
following page"
3.1.1.6. Check of a point of switching off of coupling