Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.1.1. The control system of switching off of coupling at launch of the engine
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
3.1.1.3. Adjustment of height of provision of a pedal of coupling
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
3.1.1.6. Check of a point of switching off of coupling
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-1-6-proverka-tochki-vyklyucheniya-scepleniya.html

3.1.1.6. Check of a point of switching off of coupling

Tighten the lever of the parking brake and establish a wheel stopper.
Start the engine and leave it to idle.
Without pressing a coupling pedal, slowly move the gear shifting lever to the provision of a backing before contact of gear wheels.
Gradually pressing a coupling pedal, measure course size from a point in which noise of gear wheels stops (a switching off point), to a point of a full speed of a pedal.

Fig. 3.7. Scheme of check of a point of switching off of coupling


Standard distance: 25 mm or are more (from a point of a full speed of a pedal to a switching off point) (fig. 3.7).
If the distance does not correspond to the specified parameters, execute the following:
check height of provision of a pedal;
check a gap of a pusher and a free wheeling of a pedal;
remove air from a coupling hydraulic actuator;
check a casing and the conducted clutch plate.

"previous page
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
following page"
3.1.2. Replacement of a pedal of coupling