Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.1.1. The control system of switching off of coupling at launch of the engine
3.1.1.2. Pumping of a hydraulic actuator of switching off of coupling
3.1.1.3. Adjustment of height of provision of a pedal of coupling
3.1.1.4. Check of a free wheeling of a pedal and gap of a pusher
3.1.1.5. Adjustment of a free wheeling of a pedal and gap of a pusher
3.1.1.6. Check of a point of switching off of coupling
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-1-obshhie-svedeniya.html

3.1.1. General information




On the new Camry cars the one-disk dry coupling with the hydraulic drive equipped with the switching off mechanism providing decrease in effort to a coupling pedal is used. This unification is introduced for increase in safety of the control system of switching off of coupling at launch of the engine. The clutch plate and a basket are optimized for use with the changed engine.
Coupling is located between the engine and the transmission and intended for separation and connection of the flywheel located on cranked to an engine shaft and a main shaft of the transmission.
Before performance of any operations on coupling it is necessary to execute several control operations to be sure that coupling is faulty.

Fig. 3.1. Cross-section of coupling of the Camry car


When checking coupling, first of all, check liquid level in a tank. Check a condition of hoses and their connections. Examine coupling pedal plugs on existence of wear and reliability of fastening.


"previous page
3.1. Coupling
following page"
3.1.1.1. The control system of switching off of coupling at launch of the engine