Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Replacement of a pedal of coupling
3.1.2.1. Removal
3.1.2.2. Dismantling
3.1.2.3. Installation
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-2-1-snyatie.html

3.1.2.1. Removal

Remove the panel of finishing of a combination of devices.
Remove the block of a combination of devices.
Remove the top part of the dashboard.
Remove a fork of a pusher of the main cylinder of coupling with a pin. Remove a clip and take out a pin from an opening.
Remove a coupling pedal.

Fig. 3.8. Bolt and nuts of fastening of a pedal of coupling assembled


Disconnect the coupling switch socket. Turn off a bolt and two nuts, remove a coupling pedal assembled with an arm (fig. 3.8).

Fig. 3.9. Removal of a spring of compression


Remove a spring of compression of a servomechanism. For this purpose, using the small screw-driver, remove an E-shaped ring then remove a spring of compression (fig. 3.9).

"previous page
3.1.2. Replacement of a pedal of coupling
following page"
3.1.2.2. Dismantling