Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Replacement of a pedal of coupling
3.1.2.1. Removal
3.1.2.2. Dismantling
3.1.2.3. Installation
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-2-2-razborka.html

3.1.2.2. Dismantling

Fig. 3.10. Removal of a spring of a pedal of coupling


Release fastening of a spring of a pedal of coupling to an arm (fig. 3.10).

Fig. 3.11. Removal of a pedal of coupling from an arm


Establish a coupling pedal in a vice with sponges from soft material. Remove a bolt, a nut and a pedal of coupling assembled of an arm of a pedal of coupling (fig. 3.11).

Fig. 3.12. Removal of plugs of a pedal of coupling


Remove two plugs of a pedal of coupling (fig. 3.12).

Fig. 3.13. Removal of the plug of the servo-driver of a pedal of coupling and cover of a spring: 1 – spring cover; 2 – coupling pedal servo-driver plug


Remove the plug of the servo-driver of a pedal of coupling and a cover of a spring (fig. 3.13).

Fig. 3.14. Removal of the first buffer


Remove the first buffer of a pedal of coupling (fig. 3.14).

Fig. 3.15. Removal of the plug of a fork of a pusher of the main cylinder of coupling


Remove the plug of a fork of a pusher of the main cylinder of coupling. Using a face wrench (8 mm) and the hammer, beat out the fork plug from a coupling pedal assembled (fig. 3.15).

"previous page
3.1.2.1. Removal
following page"
3.1.2.3. Installation