Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.3.1. Removal of the main cylinder of coupling
3.1.3.2. Removal of a set of the piston of the main cylinder of coupling
3.1.3.3. Installation of a set of the piston of the main cylinder of coupling
3.1.3.4. Installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-3-3-ustanovka-komplekta-porshnya-glavnogo-cilindra-scepleniya.html

3.1.3.3. Installation of a set of the piston of the main cylinder of coupling

Fig. 3.24. Places of putting jellied lubricant on the piston case


Grease piston details with lithium jellied lubricant (places of putting lubricant are shown by shooters in the figure 3.24).
Install the piston with a spring in the cylinder.

ATTENTION
You watch to damaging an internal part of the case of the cylinder.

Establish a persistent plate on a pusher.
Install a pusher in the cylinder case.

Fig. 3.23. Removal of a lock ring


Utaplivy a piston core, by means of pincers for removal and installation of lock rings establish a lock ring (see fig. 3.23).
Install a cover on the cylinder case.
Establish a pusher lock-nut.
Temporarily establish a pusher fork with a lock-nut on a pusher.
Install the entrance union and the new condensing ring.

Fig. 3.25. Scheme of installation of a shlitsevy spring pin


Using small beards with a thin sting (5 mm) and the hammer, establish shlitsevy a spring pin (fig. 3.25).

"previous page
3.1.3.2. Removal of a set of the piston of the main cylinder of coupling
following page"
3.1.3.4. Installation of the main cylinder of coupling