Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.5.1. Removal
3.1.5.2. Installation
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-5-1-snyatie.html

3.1.5.1. Removal

Fig. 3.31. Bolts of fastening of an arm of the working cylinder of coupling and intermediate accumulator of coupling


Turn off bolts of fastening of an arm of the working cylinder of coupling (are shown by shooters in the figure 3.31).
Using special adaptation 09023-00100, disconnect two flexible hoses. Turn off two bolts and two nuts of fastening of the intermediate accumulator of coupling.
Remove the working cylinder of coupling assembled.
Remove a cover from the cylinder case.
Turn out a pusher from the cylinder case.
Take out the piston from the cylinder case.
Take out a spring from the cylinder case.
Uncover a drain stopper.
Remove a spuskny stopper of the working cylinder.
Check and clean the working cylinder of coupling.

"previous page
3.1.5. Removal and installation of the working cylinder of coupling
following page"
3.1.5.2. Installation