Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.5.1. Removal
3.1.5.2. Installation
3.1.6. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-5-2-ustanovka.html

3.1.5.2. Installation

Establish a spuskny stopper of the working cylinder, having twirled its moment inhalings of 8,3 N · m.
Establish a cover of a spuskny stopper.
Install a new spring in the cylinder case.
Establish a cover of a spuskny stopper.
Install a new spring in the cylinder case.

Fig. 3.32. Places of putting jellied lubricant on the piston of the working cylinder of coupling


Grease the piston with lithium jellied lubricant in the places shown by shooters in the figure 3.32.
Install the piston in the cylinder.
Establish a cylinder pusher.
Install a cover on the cylinder case.
Install the working cylinder of coupling assembled and fix it by 2 bolts the moment of an inhaling of 12 N · m.
Install the accumulator of coupling and fix it by 2 nuts and a bolt the moment of an inhaling of 12 N · m.

Fig. 3.33. Bolts of fastening of an arm of fastening of the working cylinder of coupling


Establish an arm of a flexible hose No. 2 and fix it by 2 bolts (fig. 3.33).
Inhaling moment:
A bolt: 12 N · m;
B bolt: 39 N · m.
Using special adaptation, connect two flexible hoses, having tightened fastening nuts the moment of an inhaling of 15 N · m.
Establish an arm of a collar and fix by a bolt, having tightened its moment inhalings of 12 N · m.
Fill a tank of the main brake cylinder with liquid for coupling and remove air from a coupling hydraulic actuator contour.
Check coupling hydraulic actuator liquid leak.
Check liquid level in a coupling hydraulic actuator tank.

"previous page
3.1.5.1. Removal
following page"
3.1.6. Removal, check and installation of coupling