Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Replacement of a pedal of coupling
3.1.3. Removal and installation of the main cylinder of coupling
3.1.4. The intermediate accumulator of coupling (is established since July, 2003)
3.1.5. Removal and installation of the working cylinder of coupling
3.1.6. Removal, check and installation of coupling
3.1.6.1. Removal
3.1.6.2. Check
3.1.6.3. Installation
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-1-6-1-snyatie.html

3.1.6.1. Removal

Remove the transmission in the block with the main transfer.
Remove a coupling switching off fork cover.
Remove a coupling switching off fork assembled.
Remove a coupling switching off bearing coupling clip.
Remove a support of a fork of switching off of coupling from the transmission.
Apply assembly tags on a casing of coupling and a flywheel.
Turn off each bolt at one time on one turn, before easing of effort of a spring.

Fig. 3.34. Removal of a casing of coupling


Turn off bolts and a casing of coupling (fig. 3.34).
Remove the conducted clutch plate.

ATTENTION
Preserve a clutch plate, surfaces of a press disk and a flywheel against hit on them of oil and foreign objects.

"previous page
3.1.6. Removal, check and installation of coupling
following page"
3.1.6.2. Check