Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check of level of oil of the mechanical transmission
3.2.3. Components of the mechanical transmission in the block with the main transfer
3.2.4. Replacement of a forward epiploon of differential
3.2.5. Repair of differential
3.2.5.1. Removal of a box of differential
3.2.5.2. Check of a district gap of semi-axial gear wheels
3.2.5.3. Removal of a pin of an axis and axis of satellites of differential
3.2.5.4. Removal of a forward semi-axial gear wheel of differential
3.2.5.5. Assembly
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-2-5-4-snyatie-perednejj-poluosevojj-shesterni-differenciala.html

3.2.5.4. Removal of a forward semi-axial gear wheel of differential

Fig. 3.66. Extraction of a forward semi-axial gear wheel of differential


Remove 2 satellites of differential, 2 persistent washers of satellites of differential, 2 semi-axial gear wheels and 2 persistent washers of semi-axial gear wheels from a differential box. Rotating the differential satellite, remove 2 persistent washers of satellites and persistent washers of semi-axial gear wheels. (fig. 3.66).

Fig. 3.67. Measurement of thickness of a persistent washer of the satellite of differential


Using a micrometer, measure thickness of a persistent washer of the satellite of differential (fig. 3.67).
Minimum thickness: 0,90 mm.
If thickness is less than minimum, replace a persistent washer of the satellite of differential.

Fig. 3.68. Measurement of outer diameter of an axis of satellites of differential No. 1


Using a micrometer, measure the outer diameter of an axis of satellites of differential No. 1 (fig. 3.68).
Minimum thickness: 17,975 mm.

"previous page
3.2.5.3. Removal of a pin of an axis and axis of satellites of differential
following page"
3.2.5.5. Assembly