Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.10.1. Survey and check of the coupling of the hydrotransformer
3.3.10.2. Cleaning and check of an oil pipeline and oil cooler
3.3.10.3. Survey of a gear wreath and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-10-2-ochistka-i-proverka-masloprovoda-i-maslookhladitelya.html

3.3.10.2. Cleaning and check of an oil pipeline and oil cooler

Fig. 3.84. Cleaning and check of an oil pipeline and oil cooler


At survey of the coupling of the hydrotransformer or replacement of working liquid clear an oil pipeline and the oil cooler (fig. 3.84).

NOTE
Give compressed air under pressure of 196 kPa through an inlet hose.
If at working liquid there is a large number of a suspension, add new working liquid, using the piston pump, and again clear system.

If working liquid dimmed, examine the oil cooler (radiator).
Do not allow deformation of the coupling of the hydrotransformer and damage of gear wheels of the oil pump.

Fig. 3.85. Samples of serviceable and faulty bolts of the coupling


At detection of any traces of contact on the end of a bolt of the coupling of the hydrotransformer and in the opening basis under a bolt owing to the increased gaps replace a bolt and the coupling of the hydrotransformer (fig. 3.85).
All bolts have to be identical length.
Bolts with washers have to be used.

"previous page
3.3.10.1. Survey and check of the coupling of the hydrotransformer
following page"
3.3.10.3. Survey of a gear wreath and drive plate