Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.10.1. Survey and check of the coupling of the hydrotransformer
3.3.10.2. Cleaning and check of an oil pipeline and oil cooler
3.3.10.3. Survey of a gear wreath and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-10-3-osmotr-zubchatogo-venca-i-vedushhego-diska.html

3.3.10.3. Survey of a gear wreath and drive plate

Fig. 3.86. Measurement of a beating of a drive plate


Install the indicator of hour type and measure a beating of a drive plate (fig. 3.86).
Examine a gear wreath on existence of damages.
Maximum beating: 0,20 mm.
If the beating does not keep within the admission or the gear wreath is damaged, replace a drive plate.

"previous page
3.3.10.2. Cleaning and check of an oil pipeline and oil cooler
following page"
3.3.11. Removal and installation of the switch of situation parking / neutral