Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.11.1. Adjustment of the switch of situation parking / neutral
3.3.11.2. Installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-11-1-regulirovka-pereklyuchatelya-polozheniya-stoyanka-nejjtral.html

3.3.11.1. Adjustment of the switch of situation parking / neutral

Install the situation switch a parking / neutral on a shaft of the manual valve.
Temporarily establish 2 bolts.
Place a new lock plate and tighten a nut.
Inhaling moment: 6,9 N · m.
Temporarily install the lever of a shaft of management.

Fig. 3.92. Adjustment of the switch of situation parking / neutral


Turn the lever counterclockwise against the stop, then turn the lever clockwise on 2 clicks (fig. 3.92).
Remove the lever of a shaft of management.

Fig. 3.93. Check of the switch of situation parking/neutral


Combine a groove with the basic line of a neutral (fig. 3.93).
Holding the switch on the place, tighten 2 bolts of fastening.
Inhaling moment: 5,4 N · m.

Fig. 3.94. Installation of a nut with a lock plate


Using the screw-driver, establish a nut with a lock plate (fig. 3.94).

"previous page
3.3.11. Removal and installation of the switch of situation parking / neutral
following page"
3.3.11.2. Installation of the switch of situation parking / neutral