Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.14.1. Removal of a shaft of the stator
3.3.14.2. Check of gaps of the oil pump
3.3.14.3. Removal of the leader and conducted gear wheels of the oil pump
3.3.14.4. Removal of a forward sealing ring and forward epiploon of the case of the oil pump
3.3.14.5. Check of the oil pump
3.3.14.6. Assembly of the oil pump
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-14-1-snyatie-vala-statora.html

3.3.14.1. Removal of a shaft of the stator

Examine the oil pump.

Fig. 3.109. Check of a gear wheel of the oil pump


Turn the leading gear wheel of the oil pump 2 screw-drivers and make sure that it rotates smoothly (fig. 3.109).

ATTENTION
You watch to damaging an epiploon ledge.


Fig. 3.110. Removal of sealing rings of the clutch drum


Remove 2 sealing rings of the clutch drum (fig. 3.110).

Fig. 3.111. Removal of a shaft of the stator


Using a face key of Torx (T30), turn off 11 bolts of fastening and remove a stator shaft. You store gear wheels in an assembly order (fig. 3.111).

"previous page
3.3.14. Repair of the oil pump (U140E/U140F)
following page"
3.3.14.2. Check of gaps of the oil pump