Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.14.1. Removal of a shaft of the stator
3.3.14.2. Check of gaps of the oil pump
3.3.14.3. Removal of the leader and conducted gear wheels of the oil pump
3.3.14.4. Removal of a forward sealing ring and forward epiploon of the case of the oil pump
3.3.14.5. Check of the oil pump
3.3.14.6. Assembly of the oil pump
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-14-6-sborka-maslyanogo-nasosa.html

3.3.14.6. Assembly of the oil pump

Fig. 3.120. Press fitting of a new epiploon of the pump


Using special adaptation 09350-32014 (09351-32140) and the hammer, establish a new epiploon of the pump (fig. 3.120).

NOTE
Before installation grease an epiploon edge with vaseline. The epiploon has to be established aflush with an outer edge of the oil pump.


Fig. 3.121. Installation of a sealing ring of the case of the oil pump


Grease a sealing ring with working liquid for the automatic transmission, install it in the case of the oil pump (fig. 3.121).

Fig. 3.122. Installation of the forward conducted gear wheel of the oil pump


Grease the forward conducted gear wheel of the oil pump with working liquid for the automatic transmission, install it in the case of the oil pump by a tag (fig. 3.122) up.

Fig. 3.123. Installation of a forward leading gear wheel of the oil pump


Grease a forward leading gear wheel of the oil pump with working liquid for the automatic transmission, install a gear wheel in the case of the oil pump by a tag (fig. 3.123) up.

Fig. 3.124. Installation of a shaft of the stator


Establish a stator shaft, having combined openings under fastening bolts. Using a face key of Torx (T30), establish and tighten 11 bolts of fastening (fig. 3.124).
Inhaling moment: 9,8 N · m.

Fig. 3.125. Installation of sealing rings of the clutch drum


Establish 2 new sealing rings of the clutch drum (fig. 3.125).

ATTENTION
Do not expand excessively a gap between the ends of rings.

Check the oil pump, for this purpose turn the leading gear wheel 2 screw-drivers and make sure that it rotates smoothly.

"previous page
3.3.14.5. Check of the oil pump
following page"
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)