Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-15-zamena-perednego-salnika-differenciala-avtomaticheskojj-korobki-peredach-u140e-u241e.html

3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)

Remove forward wheels.
Remove the lower protection covers of the engine.
Remove a drain stopper of the automatic transmission and merge working liquid. Having replaced laying of a drain stopper, establish it into place, having twirled the moment of an inhaling of 49 N · m.
Remove forward halts in collecting (see further).

Fig. 3.126. Removal of an epiploon of a forward cover of a case of the main transfer


Using special adaptation 09308-00010, remove an epiploon of a forward cover of a case of the main transfer (fig. 3.126).

Fig. 3.127. Removal of an epiploon of a case of the transmission


Using special adaptation 09308-00010, remove an epiploon of a case of the transmission (fig. 3.127).
Grease a working edge of a new epiploon with the MR jellied lubricant.

Fig. 3.128. Press fitting of an epiploon of a forward cover of a case of the main transfer


Using special adaptation 09608-10010 and the hammer, press a new epiploon (fig. 3.128).
Press fitting depth: (0±0,5) mm.

ATTENTION
You watch to damaging a working edge of an epiploon.

Cover a working edge of a new epiploon with the MR jellied lubricant.

Fig. 3.129. Press fitting of an epiploon of a case of the main transfer


Using special adaptation 09608-32010 and the hammer, establish a new epiploon (fig. 3.129).
Carry out assembly and installation of other elements as it should be, the return to removal.

"previous page
3.3.14.6. Assembly of the oil pump
following page"
3.4. Driving mechanism