Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Planetary transmission
3.3.3. Elements of the planetary transmission
3.3.4. Hydraulic control system
3.3.5. Safety measures in operating time with automatic transmissions
3.3.6. Check of working liquid of the automatic transmission
3.3.7. Check and adjustment of a cable of control of the valve throttle
3.3.8. Check and survey of the switch of situation parking / neutral
3.3.9. Adjustment of position of the lever of gear shifting
3.3.10. Check of the coupling of the hydrotransformer and drive plate
3.3.11. Removal and installation of the switch of situation parking / neutral
3.3.12. Removal and installation of RPM meters of the transmission
3.3.13. Replacement of the valvate block of the automatic transmission
3.3.14. Repair of the oil pump (U140E/U140F)
3.3.15. Replacement of a forward epiploon of differential of the automatic transmission (U140E/U241E)
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-3-6-proverka-rabochejj-zhidkosti-avtomaticheskojj-korobki-peredach.html

3.3.6. Check of working liquid of the automatic transmission

Make a trip on the car the engine and the transmission got warm up to the normal working temperature.
Liquid temperature: 70–80 °C.
Stop the vehicle on a horizontal surface and tighten the parking brake.
Idling the engine at the pressed pedal of a brake move the gear shifting lever serially to all provisions from P to L and return to situation P.
Take out the probe for measurement of level and wipe it.
Insert the probe completely into a tube.

Fig. 3.75. Check of level of liquid on a sampler of the automatic transmission


Take out the probe and check that the level of liquid corresponds to the provision of NOTES (fig. 3.75).
If there are leaks, it is necessary to repair or replace sealing rings, epiploons, traffic jams or other parts.

"previous page
3.3.5. Safety measures in operating time with automatic transmissions
following page"
3.3.7. Check and adjustment of a cable of control of the valve throttle