Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.4.1. General information
3.4.2. Check on the car
3.4.3. Components of the driving mechanism
3.4.4. Repair of a nave and rotary fist of a forward wheel
3.4.5. Replacement of a bolt of a nave of a forward wheel
3.4.6. Removal and installation of a nave of a back wheel
3.4.7. Removal and installation of a rotary fist of a nave of a back wheel
3.4.8. Replacement of a bolt of a nave of a back wheel
3.4.9. Dismantling of the drive of a forward wheel
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-4-2-proverka-na-avtomobile.html

3.4.2. Check on the car

Remove a forward wheel.
Disconnect a forward left support of a disk brake.
Remove a forward disk.
Using the indicator of hour type, check a gap about the center of a nave of a wheel.
At most: 0,05 mm.
If the gap exceeds a maximum, replace the bearing.
Using the indicator of hour type, check a beating for peripheries of a surface of a nave of a wheel.
At most: 0,05 mm.
If the beating exceeds a maximum, replace a nave.
Establish a forward disk.
Establish a forward left support of a disk brake.
Establish a forward wheel.
Inhaling moment: 103 N · m.
Remove a back wheel.
Disconnect a back left support of a disk brake.
Remove a back disk.
Install the indicator of hour type about the center of a nave of a wheel and check an axial gap.
At most: 0,05 mm.
If the gap exceeds a maximum, replace a nave.
Using the indicator of hour type, check a beating for peripheries of a surface of a nave of a wheel.
At most: 0,07 mm.
If the beating exceeds a maximum, replace a nave.
Establish a back disk.
Establish a back left support of a disk brake.
Establish a back wheel.
Inhaling moment: 103 N · m.

Fig. 3.131. Check of a gap of the hug bearing of a forward wheel




Fig. 3.132. Check of a beating of a nave of a forward axis




Fig. 3.133. Check of a gap of the hug bearing of a back wheel




Fig. 3.134. Check of a beating of a nave of a back axis





"previous page
3.4.1. General information
following page"
3.4.3. Components of the driving mechanism