Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.4.1. General information
3.4.2. Check on the car
3.4.3. Components of the driving mechanism
3.4.4. Repair of a nave and rotary fist of a forward wheel
3.4.5. Replacement of a bolt of a nave of a forward wheel
3.4.6. Removal and installation of a nave of a back wheel
3.4.7. Removal and installation of a rotary fist of a nave of a back wheel
3.4.7.1. Removal
3.4.7.2. Installation
3.4.8. Replacement of a bolt of a nave of a back wheel
3.4.9. Dismantling of the drive of a forward wheel
3.5. Tables
4. Running gear
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

3-4-7-2-ustanovka.html

3.4.7.2. Installation

Establish a fist of a nave of a back suspension bracket, having fixed it by 2 bolts and nuts.
Inhaling moment: 255 N · m.
Fix the lever of a back suspension bracket No. 1 on a fist of a nave of a back suspension bracket by a bolt and a nut, having temporarily tightened a bolt.

NOTE
Insert a bolt from the forward party of the car and at installation of a nut rotate a bolt.
Fix the lever of a back suspension bracket No. 2 on a fist of a nave of a back suspension bracket by a bolt and a nut, having temporarily tightened a bolt.
Establish a nave of a back wheel.
Establish a drift control system sensor wire.
Establish a back disk.
Establish a support of a disk brake.
Temporarily tighten bolts of an extension of a back suspension bracket assembled.
Stabilize a suspension bracket.


Fig. 3.158. Bolts of fastening of the lever of a back suspension bracket No. 1


Completely tighten bolts of fastening of the lever of a back suspension bracket No. 1 (fig. 3.158).

Fig. 3.159. Bolts of fastening of the lever of a back suspension bracket No. 2


Completely tighten bolts of fastening of the lever of a back suspension bracket No. 2 (fig. 3.159).

Fig. 3.160. Bolts of fastening of an extension of a back suspension bracket assembled


Completely tighten bolts of fastening of an extension of a back suspension bracket assembled (fig. 3.160).
Establish a back wheel.
Inhaling moment: 103 N · m.
Examine and adjust the angles of installation of back wheels.
Check ABS speed sensor signal.

"previous page
3.4.7.1. Removal
following page"
3.4.8. Replacement of a bolt of a nave of a back wheel