Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. Preliminary checks
4.1.1.1. Check of height of the drawing in protectors
4.1.1.2. Replacement of tires
4.1.2. Measurement of clearance of forward and zadnkhy wheels of the car
4.1.3. Check and adjustment of corners of a convergence of wheels
4.1.4. Check and adjustment of angles of rotation of wheels
4.1.5. Check of disorder, longitudinal and cross inclination of axes of turn
4.1.6. Adjustment of disorder
4.2. Forward and back suspension brackets
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-1-1-2-zamena-shin.html

4.1.1.2. Replacement of tires

When replacing tires use only tires of the identical sizes and a design with the identical drawing of a protector and with equivalent or bigger load ability. Use of the tire of any other sizes or type can seriously affect controllability, comfortableness, accuracy of indications of the speedometer/odometer, clearance, distance between a body and the tire or a chain of antisliding.

ATTENTION
Do not combine radial and diagonal tires. It can become the reason of loss of controllability of the car and lead to accident.


Fig. 4.2. Scheme of reinstallation of wheels


It is recommended to replace all four tires or, at least, both forward or back tires at the same time. Each 5000 km interchange the position of tires according to the scheme specified in the figure 4.2.

Fig. 4.3. The stand for balancing of wheels


If the wheel was under repair, then after repair it is necessary to carry out balancing of wheels. Balancing of a nebkhodim as well in cases of reinstallation of wheels (fig. 4.3).

"previous page
4.1.1.1. Check of height of the drawing in protectors
following page"
4.1.2. Measurement of clearance of forward and zadnkhy wheels of the car