Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. Preliminary checks
4.1.2. Measurement of clearance of forward and zadnkhy wheels of the car
4.1.3. Check and adjustment of corners of a convergence of wheels
4.1.3.1. Check
4.1.3.2. Adjustment
4.1.4. Check and adjustment of angles of rotation of wheels
4.1.5. Check of disorder, longitudinal and cross inclination of axes of turn
4.1.6. Adjustment of disorder
4.2. Forward and back suspension brackets
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-1-3-2-regulirovka.html

4.1.3.2. Adjustment

Remove collars of covers.
Weaken lock-nuts of tips of steering drafts.

Fig. 4.6. Adjustment of corners of a convergence of wheels


Adjust a convergence corner by turn of the left and right steering drafts on the identical speed (fig. 4.6).
Try to establish average value of a corner of a convergence. Make sure that lengths of the right and left drafts are identical.
Difference of lengths of drafts: less than 1,5 mm.
Tighten lock-nuts of tips of steering drafts.
Inhaling moment: 74 N · m.
Establish into place covers and fix them by collars.

ATTENTION
Make sure that covers are not overwound.

"previous page
4.1.3.1. Check
following page"
4.1.4. Check and adjustment of angles of rotation of wheels