Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Forward and back suspension brackets
4.2.1. Forward and back suspension brackets – general information
4.2.2. Shock-absorber
4.2.3. Back suspension bracket
4.2.4. Components of a forward suspension bracket
4.2.4.1. Check of components of a forward suspension bracket
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
4.2.6. Removal, check and installation of the lower spherical support
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket
4.2.8. Components of a back suspension bracket
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-2-4-1-proverka-komponentov-perednejj-podveski.html

4.2.4.1. Check of components of a forward suspension bracket

Check a rack for existence of leak of working liquid, damages of dustproof covers and a spring of a suspension bracket.
Examine shock-absorbers on existence of cracks or damages. Check a condition of saddles of a spring.
Check the shock-absorber for signs of leak of working liquid. Check on all length a shock-absorber rod for lack of pointed corrosion. Check the shock-absorber case for lack of mechanical damages. Install the shock-absorber in vertical position and check its work, moving a shock-absorber rod at full capacity. In all cases the rod of the shock-absorber has to move smoothly with a notable resistance. If the rod of the shock-absorber moves breakthroughs or there are mechanical damages, the shock-absorber is subject to replacement.
Check all rubber plugs for existence of hardening, wear and splittings, in case of need replace them.
Check a dustproof cover and the spherical hinge for existence of wear and damages.
The special equipment and certain skills in work therefore hand over the lower lever in a specialized workshop are necessary for replacement of a dustproof cover. The spherical hinge cannot be replaced separately from the lever. New plugs can be installed, using a vice and tubes suitable on diameter or mandrels for a vypressovka of old plugs from the lever and a press fitting of new. At installation of plugs use soap solution as lubricant.

NOTE
You carry out a final inhaling of nuts and bolts of fastening of the lower lever of a forward suspension bracket to the lower frame after the car is lowered on wheels.

"previous page
4.2.4. Components of a forward suspension bracket
following page"
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket