Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Forward and back suspension brackets
4.2.1. Forward and back suspension brackets – general information
4.2.2. Shock-absorber
4.2.3. Back suspension bracket
4.2.4. Components of a forward suspension bracket
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
4.2.5.1. Removal
4.2.5.2. Check
4.2.5.3. Installation
4.2.6. Removal, check and installation of the lower spherical support
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket
4.2.8. Components of a back suspension bracket
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-2-5-1-snyatie.html

4.2.5.1. Removal

Remove a forward wheel.

Fig. 4.22. Untwisting of a nut of fastening of a rack of the stabilizer of cross stability


Turn off a nut of fastening of a rack of the stabilizer of cross stability (fig. 4.22).

ATTENTION
If the axis of the spherical hinge is turned together with a nut, use a hexagonal wrench (on 6 mm) to hold a rack.


Fig. 4.23. Weakening of a lock-nut of the top support of a rack


Weaken a lock-nut of the top support of a rack (fig. 4.23).

ATTENTION
Do not turn off a nut finally.


Fig. 4.24. Detachment of a brake hose and plait of wires of the sensor of frequency of rotation (ABS)


Disconnect a bolt of fastening of an arm of a brake hose. Disconnect a brake hose (fig. 4.24), a plait of wires of the sensor of frequency of rotation (ABS).
Disconnect fastening collars from a rack.
Remove 2 bolts and two nuts of fastening of a damping rack.

Fig. 4.25. Nuts of fastening of the top support of a rack


Turn off 3 nuts of fastening of the top support of a rack and remove a damping rack (fig. 4.25).
Establish a bolt and two nuts on an arm in the lower part of a rack and fix it in a vice.

Fig. 4.26. Compression of a spring of a rack with the help of the special tool


Using the special tool, squeeze a spring (fig. 4.26).
Using the special tool, hold the top cup of a spring and turn off a nut.
Sort a rack, having removed the top support of a rack, the bearing, the top cup of a spring, the insulator of the shock-absorber, the course limiter a szhitiya, a spring and the insulator of a spring.

"previous page
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
following page"
4.2.5.2. Check