Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Forward and back suspension brackets
4.2.1. Forward and back suspension brackets – general information
4.2.2. Shock-absorber
4.2.3. Back suspension bracket
4.2.4. Components of a forward suspension bracket
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
4.2.5.1. Removal
4.2.5.2. Check
4.2.5.3. Installation
4.2.6. Removal, check and installation of the lower spherical support
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket
4.2.8. Components of a back suspension bracket
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-2-5-3-ustanovka.html

4.2.5.3. Installation

Install the lower insulator of a spring on a rack.
Install the limiter of the course of compression of a spring on a rod.

Fig. 4.28. Compression of a spring of a rack with the help of the special tool


Using the special tool, squeeze a spring and establish a spring on a rack (fig. 4.28).

Fig. 4.29. Scheme of installation of the insulator of the shock-absorber and cup of a spring


Install the insulator of the shock-absorber and a cup of a spring. Combine a tag of "OUT" on the top cup of a spring with a tag on the insulator of the shock-absorber, as shown in the figure 4.29.

Fig. 4.30. Installation of a cup of a spring in the correct situation


Install the top cup of a spring by a tag to a back part of the car (fig. 4.30).

Fig. 4.31. Installation of the bearing and top support of a rack


Install the bearing and the top support of a rack, it is correct соорентировав them in relation to a back part of the car. (fig. 4.31).

NOTE
Make sure that the bearing is installed in the top support of a rack.

Using the special tool, hold the top saddle of a spring and establish a new nut.
Inhaling moment: 49 N · m.
Establish other details as it should be, the return to removal.

"previous page
4.2.5.2. Check
following page"
4.2.6. Removal, check and installation of the lower spherical support