Tayota Kamri's repair since 2001
1. Operation manual and to maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Forward and back suspension brackets
4.2.1. Forward and back suspension brackets – general information
4.2.2. Shock-absorber
4.2.3. Back suspension bracket
4.2.4. Components of a forward suspension bracket
4.2.5. Removal, check and installation of a damping rack of a forward suspension bracket
4.2.6. Removal, check and installation of the lower spherical support
4.2.6.1. Removal
4.2.6.2. Check
4.2.6.3. Installation
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket
4.2.8. Components of a back suspension bracket
4.2.9. Removal, check and installation of a damping rack of a back suspension bracket
4.3. Tables
5. Steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment




80e768f8

4-2-6-3-ustanovka.html

4.2.6.3. Installation

Establish a spherical support and tighten a nut.
Inhaling moment: 103 N · m.
Install the new forelock.
Using a special nstrument and the hammer, establish a new boot.

NOTE
Combine openings under the sensor of frequency of rotation (ABS) in a boot and a rotary fist.

Establish a rotary fist assembled with a nave.
After installation check operation of sensors of frequency of rotation (ABS) and the angles of installation of forward wheels.

"previous page
4.2.6.2. Check
following page"
4.2.7. Removal and installation of the stabilizer of cross stability of a forward suspension bracket